| |
|
| 4",6",8",10 Submersible Pumps - TR |
Performance scope
|
Product range
Typical applications
Water Supply And Irrigation System
Lowering Underground Water Level
Booster
Various Industrial Applications
Working conditions
Solid Grain-or-fiber-free Dilute Clean Non-corrosive Liquids;
Maximum Liquid Temperature:20℃
Maximum Working Pressure:30 Bar
PH:6.5~8.5
Scope of application
This Series Is Applicable To Circulation And Pressurizing Of The
Clean Water And Softened Water;
This Series Is Made From Stainless Steel 304 And Has Good Corrosion Resistance For Conveying Cold Water Containing
Small Amount Of Oxides. It Is Also Used For Conveying Slightly Alkaline Water And De-mineralized Water. Pump Made
From Stainless Steel 316 And Fluorine Rubber Is Applicable To Conveying Highly Corrosive Liquid.
Curve conditions
The Curve Tolerance Complies With Iso9906 Shown In Attachment A.
All curves are based on the measured values of 3 380V, 50Hz,2850r/min.
All measurements are carried out with gas-free water of temperature 20 . The curve is applicable to kinematical viscosity
2 1mm /s. In case density of the liquid conveyed by the pump is higher than that of water, it is necessary to use cirresoibdubing
motor of higher output power.
The coarse part of the curve means the recommended performance scope.
The performance curve includes loss caused by stop valve etc.
Performance curve
Q/H curve means flow-rate and the curve of lifting height under the rated rotating speed.
Power curve: P2 means input power of each grade
efficiency curve: eta means the grade efficiency of the pump
Motor
4 Submersible :water filled Franklin Electric motor , water filled USR canned motor
or rewindable oil bath USR motor.
Cable:1.5 metres.
Definition of Model
 |
Section drawing 4GS
 |
Material 4GS
 |
| << BACK |
| |
|
